Truck Accessories  

  • Made with a vehicle-specific design for a custom fit

  • Tested for safety in accordance with SAE J684

  • Precisely welded for superior strength and fit

  • Protected by a durable high-gloss black powder coat finish

  • Co-cured in a rust-resistant liquid Bonderite coating

  • Strengthened with a forged, welded, seamless collar

  • Equipped with an open-back receiver for easy cleaning

  • Backed by a limited lifetime warranty

  • Made in USA

Item shown is a  2014-C Silverado/Sierra 1500 Class III Receiver Hitch Part# CUR13175  

CURT Class 3 Ball Mount #45030

CURT Hitch Lock #23579

CURT Trailer Ball #40002

Rear window protection

The Half Safety Rack provides strength and functionality while also providing protection for the driver and passenger in the cab.

SUPERIOR PROTECTION

If protection and employee safety are your primary concern, then the HALF SAFETY RACK is the solution you need. Similar to the BACKRACK™ Safety Rack, the Half Safety Rack provides protection for both driver and passenger, while providing clear visibility through the center of the window.

TONNEAU COVER

Now you don’t have to choose between a Tonneau Cover or Cab Guard.   BACKRACK™ Cab Guards are compatible with select Tonneau Covers using our TONNEAU COVER ADAPTER Brackets.  To find out if your Tonneau Cover is compatible or before purchasing a Tonneau Cover call Alliance Fleet today!

NO DRILL/LOW DRILL

Securely install your HALF SAFETY RACK Cab Guard without having to drill holes using our Standard and Toolbox Hardware Kits. Our new Low Profile Hardware Kit allows you to have your Toolbox sitting flush on the bedrail by just drilling two holes per side through the bedrail of your truck. 

The Half Louvered Rack delivers a sleek new look combining strength, functionality, and additional cab protection.

FUNCTION AND STYLE FOR TODAY’S TRUCKS

We understand that you want accessories that allow you to create a unique look for your truck. HALF LOUVERED truck racks maintain your truck's stylish good looks while providing you with a practical tool to carry ladders and long loads, secure shifting cargo, or mount almost any type of light or accessory.

TONNEAU COVER

Our TONNEAU COVER ADAPTER Brackets allow compatibility between Cab Guards and select Tonneau Covers. To find out if your Tonneau Cover is compatible or, before purchasing a Tonneau Cover.....

NO DRILL/LOW DRILL

Install your BACKRACK™ Cab Guard securely without having to drill holes using our Standard and Toolbox Hardware Kits. If you prefer to have your Toolbox sitting flush on the bedrail use our new Low Profile Hardware Kit, it does require two holes to be drilled into each side. 

The BACKRACK™ Three Light Rack combines strength, functionality, and protection with added visibility.

QUALITY STEEL THAT IS MADE IN AMERICA

All BACKRACK™ Cab Guards are built using American made Hot Rolled Pickled and Oiled steel. This scale-free material protects your truck’s finish and ensures scale will not peel off. 

TONNEAU COVER

Tonneau Cover or Cab Guard?  Now you can have both working for you.  BACKRACK™ Cab Guards are compatible with select Tonneau Covers using our TONNEAU COVER ADAPTER Brackets.  To find out if your Tonneau Cover is compatible or, before purchasing a new Tonneau Cover.....

NO DRILL/LOW DRILL

BACKRACK™'s Standard and Toolbox Hardware Kits allow you to install your THREE LIGHT Cab Guard securely without having to drill holes on most late model trucks.

Bed Liners

BedTred vs. Spray In Liner

Drop In Plastic Liner

Drop-in plastic liners certainly offer adequate impact resistance however they have many inherent limitations you should be aware of (see Installation, Cargo Protection, and Skid Protection tabs).

BedRug Liner

Provides 3/4" of impact absorbing closed cell foam to prevent your truck bed from dents and dings (and provides a cushioned surface for your knees!).

Spray In Liner

Provides little to no dent protection from heavy cargo which can cause dings, dents and gouges in your truck bed.

Spray-In Liners

Requires truck bed finish to be scuffed with a sanding wheel or an etching solvent is applied in order for the material to adhere to the bed. Spray In liners are permanent, can never be removed, and are a challenge to repair.

Provides little to no dent protection from heavy cargo which can cause dings, dents and gouges in your truck bed.

Most spray in liners offer little to no kind of

skid resistance Hit the gas pedal and your cargo goes crashing toward your tailgate. Hit the brake and it slides forward toward the cab.

BedTred Pro Series

BedTred is a 5-piece liner that zips together and installs with hook and loop fasteners. No drilling, no sanding, no prepping, and no damage to the truck bed. Non-woven fiber backing will not scratch or harm your truck bed finish. It can be removed at any time or even moved from truck to truck.

It provides a 1/4" center layer of impact absorbing closed cell foam to prevent your truck bed from dents and dings (and provides a cushioned surface for your knees!).

BedTred has a textured TPO composite surface to grip your cargo and hold it in place. Simply put, BedTred provides skid resistance unmatched by any spray in liner.

BedMat vs. Rubber Mat

Rubber Mat

Flat backing leaves voids between factory truck bed ribs. Underside "Nibs" or "Cleats", which help hold mat into place, can cause chafing and scuff your factory paint finish.

BedRug Mat

The 3/4" custom molded backing fills in the truck bed rib configuration for a flat, void free surface (spray in / no liner style only). Non-abrasive foam does not chafe or damage factory clear coat finish.

New York

2715 W. Henrietta Road

Rochester, NY 14623​

Map

North Carolina

1077 Mecklenburg  Hwy

Mooresville, NC 28115

Map

¡Aqui hablamos español!

California

22133 S. Vermont Ave

Torrance, CA 90502​

Map

© 2020 by Alliance Fleet, LLC.